Please see following instructions on how to remove the LX door trim color push pins located above the armrest area both fore and aft. Depress center pin by using constant pressure in the center of the pin to push the pin inward. The pin will move to a indent and be underflush to the top of the pin head. The pin should be loose in the hole and can be removed by hand. If the pin is driven all the way through the center then removal of the watershield will be needed to retrieve the pin from the bottom of the door sheet metal inner and prevent any BSR issues. To restore the center pin to its install position, push the center pin from the back side untill it becomes overflush with the head of the fasterner. Most common way is to use flat surface and push on the head of the pin to reset. To reinsert the pin simply place in door trim panel and use constant force to push the center rivet flush with the pin head. ______________________________________ Contact Us at CAGRIS@Chrysler.com for feedback related ONLY to this GPOP Tech Tip. DO NOT email regarding repair procedures unrelated to this Tech Tip or part order inquires. Please include the Part Number (s) and Tech Tip Part Description of the Tech Tip you are referencing for our tracking system. |