Teksti tõlkimiseks on kasutatud Google Translate online,mistõttu võib esineda vigu.Tõlke algkeeleks on inglise keel,vaatamaks originaal keelsena vaheta keel siin.
Originaal keele valik
This tip covers two potential customer issues with 3rd row power seats. 1) For an intermittent or partial unlatch condition noted with the inboard latch of the 60 percent side seat, Technical Service Bulletin #08-001-09 should be reviewed. And, if applicable, follow procedure for a flash update of the Folding Seat Module (FSM). If issue continues after performing reflash, use the StarScan tool to check FSM fault codes. 2) For seat backs stuck in the folded or fully reclined position, the drive side (outboard) recliner is likely jammed. DO NOT REPLACE THE MOTOR OR INBOARD RECLINER. Replace only the drive side (outboard) recliner. The drive side recliner is PN 68028320AA for the 40% seat and PN 68028321AA for the 60% seat. If the drive side recliner is replaced, the Recliner End Of Travel Calibration routine found under Miscellaneous Functions must be performed after replacement using the scan tool. Ensure all four power 3rd row seat leg latches are latched prior to performing this routine. This can be accomplished by manually pushing the seat down until latches are closed. ______________________________________ Contact Us at CAGRIS@Chrysler.com for feedback related ONLY to this GPOP Tech Tip. DO NOT email regarding repair procedures unrelated to this Tech Tip or part order inquires. Please include the Part Number (s) and Tech Tip Part Description of the Tech Tip you are referencing for our tracking system.
